Increase your possibilites with one of these manual wood bandsaws!
- For cutting solid wood, plywood, fiberboard panels, laminated panels or any material used in carpentry.
- Cuts material up to 12½" (SN33) or 16 " (SN44) high.
- Customize to your needs and increase efficiency. Add an articulated pivot arm for cutting precise circles, inclination for cutting bevels, pneumatic tools, work tables and more.
- Safe and simple to use.
- Configure for your needs.
| Technical Data | SN33 | SN44 |
|---|---|---|
| Cutting width |
15.4 in
|
15.4 in
|
| Max. cutting height |
12½ in
|
16 in
|
| Dimensions of work surface |
19¾ x 15¾ in
|
19¾ x 15¾ in
|
| Blade total length |
99.6 in
|
107 in
|
| Minimum blade width |
3 mm / 0.118 in
|
3 mm / 0.118 in
|
| Approximate weight |
110 lbs
|
121 lbs
|
| Power of motor | 1.5 HP, 1.1 kW | |
|
Motor options:
|
||
|
Single phase 220 V
|
||
|
3-phase 220 V
|
||
|
3-phase 400 V
|
||
Slim, sleek and curvaceous, the Dario SN33 and SN44 are agile and maneuverable manual band saws.
The new SN44 permits you to cut beams as thick as 16 inches.
The articulated arm makes many things possible.
Depending on your requirements, you can use either saw mounted on a mobile trolly (SET 1500) or on a column to cut arcs and circumferences (SET 2000). More information on these configurations below.
NEW: Above left, first and second picture: New telescoping blade protection system. Raise or lower it easily and safely. Third picture: New suction system. Protect your health and keep your workplace cleaner.
The sawing machine has 3 vulcanized fly wheels that permit the use of cutting blades of different sizes according to the type of cut to be made.
The SN44 is Dario's latest model. A little bigger than the SN33, it can cut beams up to 16 inches thick.
Options: SR-700 Tilting work surface
By replacing the fixed bracket with the SR-700 tilting surface, the SN33 or SN44 MEDIA band saw can be tilted from 0 to 45°.
SET 1500 Mobile Trolley
The Dario SN33/SN44 MEDIA woodworking band saw in its SET 1500 configuration, with articulated arm (BS-400), mobile trolley, clamping system and worktop with machine locking system.
The mobile trolley allows you to move the machine wherever you need it.
This portable band saw is ideal for jobs such as shaping beam ends. See this system in action in the video further down the page.
SET 2000 on Central Column
The central column allows you make circular cuts. It can be fastened to the floor or mounted on a movable steel pallet. The machine can rotate 360 degrees around the column. Cut precise arcs and perfect circles. Work all four sides of a panel. Cut joists, beams, corbels, contours etc.
SET 2000 with Pneumatic Support
Add pneumatic devices to increase the efficiency of this saw. Left: Set 2000 with pneumatic support table, multi-stacking and automatic material advance for contour process using templates. Finished cuts are held on a rack.
Set 2000 Carousel Version
Right: With pneumatic clamping on a square turn table, this configuration can receive different parts and can cut different contours in each work station. With automatic advance for next cut. Ideal for production runs.
Secure the template to the upper section of the support to save time cutting.
Video
See Dario wood bandsaws in action in the video below.
The first half of the video shows the SV3 MEDIA which have been replaced by the SN33/SN44. The second half shows the Dario SV3 MAXI, a larger woodworking bandsaw.
More pictures
Above left: Cutting with template and copying device. Center: Detail of copying device. Right: Detail of pneumatic cylinder for securing the piece.
Choose an assembly to match your needs. Saw unobstructed around timber ends, centers or even in a circular fashion.
Dimensions of the Dario SN33/SN44 MEDIA bandsaw for wood
Note: The SN33/SN44 replace the SV3 MEDIA, keeping all the features that have made the SV3 MEDIA so popular, while adding improvements in technology. safety and size. Picture shows SV3 MEDIA dimensions.
