HolzMaster Double-Cut Ultra Smooth Auger Bits
Unlearn your past auger experience.
Double-Cut Ship Augers will drive through wood where others seize.
They cut a smooth hole, with chips ejecting easily up the side wall for repeated, continuous operation. Made for us in Japan by Woodowl. Available only through Timber Tools.
EFFORTLESS, SMOOTH cutting for perfectly finished holes without "blowout".
- LEAD SCREW starts easily and pulls through, without material build-up.
- PERFECTLY CONCENTRIC shape for even and easy cutting of accurately sized holes.
- CARBON STEEL, heavy construction, precisely heat-treated and tempered.
- Available in 12, 18 and 24 inch lengths in actual Imperial measure
- The choice of timber framers and log builders.
Some of the benefits of HolzMaster Double-Cut Augers:
- Need literally half the horsepower of a drill, because Double-Cut auger bits produce smaller shorter wood chips, are teflon coated and promote easy exit.
- Try it on the dryest of cedar or even into the end-grain and be prepared for a surprise.
- Perfect combination of smooth outer wall, smaller wood chips and teflon coating give you an auger bit heretofore not delivered. To the combined benifits of ease of use, safety, and an ultra-clean hole, we add a sharp market price.
- Shank size: 1/2", (7/16" hex), fits 1/2" chuck. Available in 12-inch, 18-inch, 24-inch length.
- Extensions available.
Double-Cut auger - the multi-application bit designed to excel in situations where wood condition ranges from pristine to poor. These bits are fast-cutting, with less material damage and user fatigue, and leave a very smooth hole.
Note: If you are reconstructing wood with unknown embedded obstructions, or old timbers, check out our Nail Chipper Ship Augers.
TESTIMONIALS
I just received my order from you for two (Doublecut) auger bits, a 3/4" x 12" and a 1 1/4" x 12". The delivery was exceptionally fast which I appreciate very much. I have just drilled holes with them and can not believe how wonderful they work. Easy and fast as well as perfect smooth holes in the hardwood. These are the best that I have ever used. Thank you for the fast service and the excellent product. I will recommend you to all of my associates and friends.
Jerry Phillips
“I used the 7/8" auger and 12" extension during my truss-building course. Your Holzmaster (Double-Cut) bit cut the cleanest hole I have ever drilled into a log. The hole was so clean and smooth that it looked like it had been polished. The other log builders in my course were equally impressed. It also cuts really fast, and feeds easily—it draws itself into the logs without having to be pushed.”
Robert W. Chambers
"Gary, Just thought you would want to know that we used 4 Zobo bits [System 3] along with the 1.25 pilot hole [using the 24" Holzmaster Doublecut Auger Bit] only sharpening each of them twice to drill +/- 2000 holes half of which were through 6" of Douglas fir the other half was through 22" douglas fir. We did all of this using only 1/2" Milwaukee magnum drills. We could not have used a better system. Thanks for your help."
Chad
(For photos, see Bartonsville Covered Bridge Facebook Page)
