Prolong the cutting efficiency of your valuable edge
tools by preventing any loss of temper in the steel
with this ingenious water-cooled sharpening system
from Sweden!
Introducing a water cooled, large diameter wheel,
hollow-grind sharpener.
The finest wet stone sharpening system availabe, the
Tormek T-7 has a wide array of specialty jigs available
for sharpening just about any tool with accurate, repeatable
results. It saves you time, it's safe, and your tools
last longer.
Safe and easy tool sharpening!
The 10" x 2" grinding wheel turns at a
slow 90 rpm through water. The water lubricates the
grinding action, keeps the tool edge cool so as to
prevent overheating and drawing the temper from the
steel, and keeps grinding dust out of the air. No sparks
are produced. Use the leather honing wheel on the left
to remove the burr and hone the tool edge.
Included
with the Tormek is the exclusive SE-76 Square Edge Jig,
which enables you to grind tools perfectly square every
time - and without scraping your knuckles! Many other
jigs are available (see
jigs below).
Customize
your Tormek to fit your needs!
Specs
- Durable drive wheel with proprietary rubber compound
- Stainless steel main shaft
- New acme threaded tool
rest with micro adjustment
- New Square Edge Jig (exclusive
to the T-7) to sharpen chisels and plane blades more
easily than ever
- 110 volts, 200W, 60Hz, 1.5 Amps, 37
lbs
- 7 year warranty
Buy your Tormek today!
 |
Supergrind 2006 - Tormek Sharpening System, including
the SE-76 Square Edge Jig shown above. Also includes
the Angle Master, Honing Compound, Stone Grader,
Diamond Truing Tool, Handbook and Instructional DVD. |
$499.99 |
|
Additional Sharpening Jigs and Sets
 |
Axe Grinding Jig - For carving and carpenter's
axes. Maximum axe size is 170mm (7 in.). |
$14.50 |
|
 |
Knife Jig - For most knives, minimum
blade length 60 mm (2 3/8"). Also for carver's
draw knives. |
$31.50 |
|
 |
Long Knife Jig - Suitable for
long and flexible knives. The 140 mm (5 1/2")
width of the jig stabilizes a thin blade. Min blade
length 160 mm (6 3/8"). |
$44.99 |
|
 |
Multi-Jig - For turning skew chisels, parting and
beading tools and roughing gouges.. Also for straight
carving gouges up to 50 mm (2") width. |
$53.99 |
|
 |
Short Tool Jig - For straight
shanked carving gouges and V tools down to 45 mm
(1 3/4") length. Also
for short wood chisels and tools for power carvers
. Maximum tool width is 32 mm (1 1/4"). |
$22.50 |
|
 |
Planer/Joiner Blade Jig - For
HSS blades of any length, including planer
blades.
Minimum width 13mm (1/2in.) Also for mitre guillotine
blades. |
$157.50 |
|
 |
Scissors Jig - For scissors and
shears. Also for portable
electric hand planer blades. |
$42.75 |
|
 |
Tool Rest - for turning scrapers, carving scorps
and inshaves, for retruing screwdrivers and cabinet
scrapers. |
$29.95 |
|
 |
Gouge and Turning Cutter
Jig - For fingernail
shaped turning gouges, bent carving gouges and V
tools. Maximum tool width 25 mm (1"). Also for
turning cutters. |
$78.75 |
|
 |
Hand Tool Kit - contains: Knife Jig, Long Knife
Jig, Scissors Jig, Short Tool Jig and Axe Jig. |
$120.00 |
|
 |
Woodturner's Kit - contains Gouge Jig, Multi Jig,
Turning Tool Setter, Leather Honing Wheel, Torlock
Jig, Dust Cover and Woodturner's Instruction Box
DVD and handbook. |
$220.00 |
|
Accessories
 |
Machine Cover - protect your investment with this
canvas dust cover |
$18.99 |
|
 |
Universal Support with Micro
Adjust Upgrade (for
models prior to 2003) |
$35.95 |
|
 |
Tormek Sharpening Handbook - Water cooled grinding
and sharpening of edge tools." 9th edition.
Hardcover. 156 pages. |
$27.95 |
|
 |
Tormek DVD - Edge tool sharpening the TORMEK way.
Included with each new TORMEK machine |
$13.50 |
|
 |
Profiled Leather Wheel - With
2 exchangeable leather discs, one with a 3 mm (1/8")
profile and one with a 60 degree point.. For inside
honing and polishing of gouges and V tools. Mounts
outside the standard leather honing wheel. |
$52.95 |
|
 |
Honing Compound - for the leather
honing wheels |
$7.95 |
|
 |
Diamond Stone Truing Tool with screw feed trues
the stone exactly round and flat |
$71.95 |
|
 |
Stone Grader - With a grit
rating of 220 with a grain size of 0.06 mm (0.0024"),
used to grade the Grindstone
to a finer surface corresponding to 1000 grit suitable
for fine finish grinding/sharpening. Use the other
side of the grader to return the stone to its 220
grit. The stone grader is also used for renewing
a glazed stone. |
$23.50 |
|
 |
Replacement SuperGrind Stone 250
x 50 mm - developed to run at low speed in water.
It is ceramically made (sintered at high temperature)
and contains grains of aluminium-oxide. Grinds very
effectively and gives a fine finish to the tool.
It quickly grinds large tools such as plane irons,
axes, scythes and even HSS steel. The grit rating
is 220 with a grain size of 0.06 mm (0.0024"). |
$139.99 |
|
 |
Replacement Leather Honing Wheel -
220 x 31mm.You hone away the burr on the leather
honing wheel impregnated with the TORMEK honing compound.
The leather removes the burr gently like the barber's
leather strop, giving you a razor sharpness and a
bevel polished to a mirror finish. |
$49.99 |
|
[top of page]
