AVOLA 75 V Circular Bench Saw with automatic positioning and NC controls

Numerically Controlled Bench Saw for cross-, rip- and mitre-cuts

Automatic loading and unloading, Numerically Controlled (NC) with push buttons. (See also CNC version with automatic processing.)

Gama 75 V - with DUO drive units. Click picture to enlarge.

The blade can be raised or lowered, angled, tilted and turned to make:

cross-cuts
rip-cuts,
hip and valley cuts
and more

with in-feed / out-feed roller tables along aluminum back fences / material stop.

Technical equipment (standard)
Motor output (S1)		15 kW with geared drive
Motor speed		3000 rpm
saw blade speed		2200 rpm
Cutting height:	90°	295 mm / 11.6 in
	45°	200 mm / 7.9 in
	30°	137 mm / 5.4 in.
Electrical saw blade inclination		90° - 30°
Revolving table		270°
Machine table with lateral movement		600 mm (23.6 in.)
in-feed / out-feed table taking up the DUO – in-feed – out-feed drive units
Pneumatic clamping cylinder right-left
Pneumatic cross-cutting operation
Laser light for cross-cutting
TCT – saw blade 750 mm / 29.5 in.
Dust extraction spigots 160 / 160 mm

Completely protected machine base

for optimal safety and protection

Pneumatic clamping cylinders

Two vertical clamping cylinders will lock the cutting material securely on the machine table, each having a distance of 400 mm from the saw blade (saw blade position 90°)

Laser light

The laser light for cross-cutting produces a red line on the material where the saw blade will cut.

Dual Drive units

The DUO drive unit system is equipped with an in-feed-roller, out-feed-roller and special press-rollers below the material. These rollers are pneumatically connected to the rollers above.

The press-rollers work like pliers, pressing against the timber only, not the roller table. When rip-cutting different sensors control the position of the timber. The drive units are moving up and down fully automatically. The rollers have a distance of 2,250 mm (88 in.).

Cutting with maximum speed, the shortest length of the timber must be at least 2800 mm (110 in) in order to allow a complete crossing above the table.

Technical data:
Geared feed motor P2 = 1,1 kW /
feed power F = 1000 N, with infinitely variable speed settings via potentiometer 0.2–36 m/min

Drive unit extension

The DUO drive unit system can be equipped optionally with a second roller each in direction to the saw blade / machine table. The distance will be reduced to 1330 mm (52.4 in.). Cutting with maximum speed the shortest length of the timber now will be 1700 mm (66.9 in.) in order to allow a complete crossing above the table.

Aluminum back fences

Torsionally rigid aluminum profiles 120 x 120 mm are used as a back fence to the roller tables.

Saw blade height adjustment

Via mechanical stop system, with scale, easy to adjust

saw blade height adjustment

Via mechanical stop system, with scale, easy to adjust

Electrical saw blade inclination 90° - 30°
via spindle system

Electrical saw blade inclination 90°-30°

The saw blade inclination from 90° to 30° takes place with an electrical stroke - cylinder, maintenance-free (speed v = 0.5°/sec)

Digital display of inclination adjustment

Dust extraction spigots

The Gama 75 V is available with two dust extraction spigots, size 160 mm each. Vacuum at dust extraction spigots 1750 pa Volume flow ≥ 3000 m³/h.

Automatic forward feed of machine table

The machine table is available with an optional automatic forward feed device via pneumatic, lateral movement approx. 600 mm (23.6"). This allows combination cross-cutting of max. 295 x 600 mm (11.6 x 23.6"), see diagram below. Also suitable for angle-cutting 90°-30°. This feature is a considerable advantage for glue lam or other large materials.

Cutting diagram, Gama 75 V - combination cut

TECHNICAL EQUIPMENT (STANDARD)
Electrical saw blade inclination 90° - 30° Drive unit device D U O Clamping cylinders right – left, vertical Laser light for cross-cutting Machine coating
OPTIONS
Clamping cylinders, horizontal, left / right
Drive unit extension, in-feed
Drive unit extension, out-feed
Drive unit machine hood ( only for SPS-positioning)
Electrical movement of rotating table 270°
Digital display for rotating table 270°
Automatic forward feed unit for machine table 600 mm
Digital display for lateral movement of machine table 600 mm
Roller table R 600 F, size 600 x 60 mm, in-feed, per m
Roller table R 600 F, size 600 x 60 mm, out-feed, per m
Aluminum back fence 120 x 120 mm (per m)
Material stop for aluminum back fence
Scale for aluminum back fence 5 m, right ascendend
Scale for aluminum back fence 10 m, right ascendend
Scale for aluminum back fence 5 m, left ascendend
Scale for aluminum back fence 10 m, right ascendend
Measuring roller table system, handdriven material stop, measuring datas with digital display, length 6 m, R 600 F MA
Other sizes on request

Back to Avola Circular Bench Saws