AVOLA 65 V Circular Bench Saw

Rip-, cross- and compound miter bench saw

The modular GAMA system to customize for your individual woodworking needs

Gama 65 V -shown with short in-feed / out-feed roller tables with aluminum backfences / material stop. Click photo to enlarge.

The blade can be raised or lowered, angled, tilted and turned to make:

cross-cuts
rip-cuts,
hip and valley cuts
and more

with in-feed / out-feed roller tables along aluminum back fences / material stop.

Technical equipment (standard)
Motor output (P 2 - S 6- 40%)		12 kW - direct
Motor speed		3000 rpm
Saw blade speed		3000 rpm
Cutting height:	90°	245 mm / 9.6 in
	45°	164 mm / 6.5 in
	30°	113 mm / 4.4 in.
Electrical saw blade inclination		90° - 30° with digital readout
Revolving table		0 - 270°
Machine table with lateral movement		400 mm (15.75 in.)
Pneumatic clamping cylinder right-left
Pneumatic cross-cutting operation
Laser light for cross-cutting
TCT – saw blade 650 mm / 25.6 in.
Dust extraction spigots 160 / 125 mm

Pneumatic clamping cylinders

Two vertical clamping cylinders will lock the cutting material securely on the machine table, each having a distance of 400 mm from the saw blade (saw blade position 90°)

Aluminum back fences

The back fence of the roller tables consists of torsionally rigid aluminum profiles 120 x 120 mm

Material stop / Measuring scale -

for simple application

Laser light

The laser light for cross-cutting produces a red line on the material where the saw blade will cut.

Dual Drive units

The dual drive unit system is equipped with an in-feed-roller and out-feed-roller system. Cutting with maximum speed, the shortest length of the timber must be at least 2800 mm (110 in.) in order to allow a complete crossing over the table.
Technical data:
Geared feed motor P2 = 1.1 kW /
feed power F = 1000 N, Feed speed 0.236 m/min

Saw blade height adjustment

Via mechanical stop system, with scale, easy to adjust

Electrical saw blade inclination 90° - 30°
via spindle system

Digital display of inclination adjustment

Dust extraction ducts

The Gama 65 V is available with two dust extraction ducts, size 160/125 mm Vacuum at dust extraction ducts pa 1.750 Volume flow ≥ 2,200 m³/h

TECHNICAL EQUIPMENT (STANDARD)
Electrical saw blade inclination 90° - 30° Dual Drive unit device Clamping cylinders right – left, vertical Laser light for cross-cutting Machine coating
OPTIONS
Dual drive unit device
Short roller in-feed / out-feed tables, 325 mm included
Clamping cylinders, horizontal, left / right
Digital display for rotating table 270°
Digital display for lateral movement of machine table 400 mm
Roller table R 600 F, size 600 x 60 mm, in-feed, per m
Roller table R 600 F, size 600 x 60 mm, out-feed, per m
Aluminum back fence 120 x 120 mm (per m)
Material stop for aluminum back fence
Scale for aluminum back fence 5 m, right ascendend
Scale for aluminum back fence 10 m, right ascendend
Scale for aluminum back fence 5 m, left ascendend
Scale for aluminum back fence 10 m, right ascendend
Measuring roller table system, handdriven material stop, measuring datas with digital display, length 6 m, R 600 F MA
Other sizes on request

Back to Avola Circular Bench Saws